Forestry – CSWR Group

ROBO ECO

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: RoboECO is a remote-controlled machine conceived to cut grass and weeds, in any working environment. Its peculiar design concept,, the low barycenter, the track edges shaped to operate in very bumpy areas still maintaining the greatest traction, special engine oil pan which allows the prolonged use of the machine, in declivity conditions in any direction, up to 50°. It is equipped with a diesel 33 HP engine, fully adequate to use at best the 130 cm shredder attached. More, you can apply other equipments, to make the machine as multifunction. Special tracks profile, low barycenter, special engine oil pan, wide raising of the cutting head allow an extreme use of the machine. Flail head, 1300 mm large, provide a higher finish in each condition, thanks to “Y” or hammer blades and to the mobile head, to accurately follow the soil profiles, thus increasing the manoeuvrability speed.

The post ROBO ECO appeared first on CSWR Group.

CRUSHERS THFL/F

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES:
THFL/F 105 Operating machine weight9000 ÷ 15000 Kg Cutting width1,05 m Required oil flow rate90 ÷ 100 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight690 Kg Pressure250 max barMax. Cutting width18 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 18). THFL/F 130 Operating machine weight9000 ÷ 15000 Kg Cutting width1,30 m Required oil flow rate90 ÷ 100 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight885 Kg Pressure250 max barMax. Cutting width18 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 18).

The post CRUSHERS THFL/F appeared first on CSWR Group.

Crusher TKD

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Horizontal reach: 6,10 m
Tractor size: from 110 up to 130 HP
The hydraulic reach mower of the TKD series have been designed for a highly professional use. Consequently the quality and reliability of each single component chosen reflects the need to serve a” professional “use. One example is the closed circuit piston hydraulic system, the coupling of the pumps with a high torque worm gearbox; cemented and hardened pins and bushes, and abrasion resistant hydraulic pipes.

The post Crusher TKD appeared first on CSWR Group.

Mini wheel loader 20 TL

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: 20 TL offers comfort and visibility at the top of its class, combining excellent manouvrability with unequalled versatility.
Practicality and operative safety are supported by the number of quick connection points and control of unloading pressure. STABILITY AND SECURITY
The semi-carriages with five oscillating rollers, offer driving comfort combined with unparalleled operative stability. Thanks to this configuration this compact loader moves with agility and safely in any terrain. A VERSATILE MACHINE
The power engine of this compact loader, in combination with the auxiliary high-flow system with maximum capacity of 160 litres at 280 bars, guarantees considerable versatility of use of all the equipment on the market.

The post Mini wheel loader 20 TL appeared first on CSWR Group.

Shredders BSV

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Horizontal reach: 8,70 – 10,40 – 12,10 – 12,60 m
Tractor size: from 100 up to 200 HP
The mid Mount reach mowers allow the best visibility of the flail head in any working condition giving the max safety in operation.

The post Shredders BSV appeared first on CSWR Group.

Articulated wheel loader PL 165 HS

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Compact wheel loader from 5,9 to 6,1 ton Designed following the same productive schemes as large production loader, with hydrostatic transmission, combined with a two-speed mechanical transfer, and a maximum speed of 40 km / h. High efficiency z-kinematics. Wide range of optional attachments. Large cabin, with excellent visibility, comfort and ergonomics usually …

Articulated wheel loader PL 165 HS Read More »

The post Articulated wheel loader PL 165 HS appeared first on CSWR Group.

Trailer FGM 18

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: This low loader trailer is mainly adopted to transport construction machines, farming machines, lifting vehicles and industrial parts. N.2 axles with pneumatic suspensions 11 ton ROR, drum brakes Gross weight 18.000 kg – Pay load 12.600 kg – Tare Weight 5.400 kg
Length of loading surface to be choosen between 7.000 / 9.000 mm
Drawbar length 1.730 mm
Height of charge zone of loading floor 820 mm
Hardwood covered on the sides
Surface treatment: Sandblasting + Primer + Finishing RAL color Rear hydraulic ramps 2.400 x 650 mm made in steel S 500
actioned with hydro pneumatic pump supplied by the air tank of the trailer

The post Trailer FGM 18 appeared first on CSWR Group.

Crushers ZMT

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Width of cut: 1,64 – 1,84 – 2,04 m
Max sidesliding: 2,22 – 2,42 – 2,62 m
Tractors size: from 50 up to 80 HP
The central and offset mowers ZMT, thanks to a wide range of working widths and the option of selecting different kind of flails, are the solutions to the requirements of the farmers and of the landscape specialists.

The post Crushers ZMT appeared first on CSWR Group.

ROBO GREEN EVO

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: RoboGREEN evo is a remote-controlled multifunctional equipment carrier machine that can work in the most hostile places, with slopes up to 55°, where the access is very difficult. Equipped with a diesel 40 HP engine and two double effect hydraulic functions it can carry various tools. Born to satisfy and meet the most exigent needs is the ultimate equipment carrier remote-controlled machine. With its power, performances, reliability and robustness it completely differs from other remote-controlled machines.

The post ROBO GREEN EVO appeared first on CSWR Group.

CRUSHERS THFM/R

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES:
THFM/R 105 Operating machine weight12000 ÷ 21000 Kg Cutting width1,05 m Required oil flow rate115 ÷ 120 l/m Rotor diameter420 mm Rotor diameter +cutting tools490 mm Machine weight860 Kg Pressure270 max bar Max. Cutting width25 cm
Forestry flail heads for excavators with rotor with forged hammer blades (max. cutting width: Ø 25 cm). THFM/R 130 Operating machine weight12000 ÷ 21000 Kg Cutting width1,30 m Required oil flow rate115 ÷ 120 l/m Rotor diameter420 mm Rotor diameter +cutting tools490 mm Machine weight950 Kg Pressure270 max bar Max. Cutting width25 cm
Forestry flail heads for excavators with rotor with forged hammer blades (max. cutting width: Ø 25 cm). THFM/R 160 Operating machine weight12000 ÷ 21000 Kg Cutting width1,60 m Required oil flow rate115 ÷ 120 l/m Rotor diameter420 mm Rotor diameter +cutting tools490 mm Machine weight1050 Kg Pressure270 max bar Max. Cutting width25 cm
Forestry flail heads for excavators with rotor with forged hammer blades (max. cutting width: Ø 25 cm).

The post CRUSHERS THFM/R appeared first on CSWR Group.