SHREDDERS – MULCHERS – CSWR Group

ROBO ECO

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: RoboECO is a remote-controlled machine conceived to cut grass and weeds, in any working environment. Its peculiar design concept,, the low barycenter, the track edges shaped to operate in very bumpy areas still maintaining the greatest traction, special engine oil pan which allows the prolonged use of the machine, in declivity conditions in any direction, up to 50°. It is equipped with a diesel 33 HP engine, fully adequate to use at best the 130 cm shredder attached. More, you can apply other equipments, to make the machine as multifunction. Special tracks profile, low barycenter, special engine oil pan, wide raising of the cutting head allow an extreme use of the machine. Flail head, 1300 mm large, provide a higher finish in each condition, thanks to “Y” or hammer blades and to the mobile head, to accurately follow the soil profiles, thus increasing the manoeuvrability speed.

The post ROBO ECO appeared first on CSWR Group.

Shredders TXV

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Estensione max. orizzontale: 5,24 – 6,25 m
Trattrici da: 80 ÷ 110 HP
The TXV reach mower series which is a proven product for Ferri is designed for the municipal and ground care operators. The machine is equipped with a high power hydraulic system which includes cast iron pumps and motors coupled to a worm high torque transmission gearbox.

The post Shredders TXV appeared first on CSWR Group.

Shredders THFL/F

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES:
THFL/F 105 Operating machine weight9000 ÷ 15000 Kg Cutting width1,05 m Required oil flow rate90 ÷ 100 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight690 Kg Pressure250 max barMax. Cutting width18 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 18). THFL/F 130 Operating machine weight9000 ÷ 15000 Kg Cutting width1,30 m Required oil flow rate90 ÷ 100 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight885 Kg Pressure250 max barMax. Cutting width18 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 18).

The post Shredders THFL/F appeared first on CSWR Group.

ROBO GREEN EVO

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: RoboGREEN evo is a remote-controlled multifunctional equipment carrier machine that can work in the most hostile places, with slopes up to 55°, where the access is very difficult. Equipped with a diesel 40 HP engine and two double effect hydraulic functions it can carry various tools. Born to satisfy and meet the most exigent needs is the ultimate equipment carrier remote-controlled machine. With its power, performances, reliability and robustness it completely differs from other remote-controlled machines.

The post ROBO GREEN EVO appeared first on CSWR Group.

Shredders TST

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Horizontal reach: 4,84 m
Tractor size: from 90 up to 110 HP
The TST50 hydraulic reach mowers, were develped and designed especially for the municipal and ground care operators.This model is mounted to the front of the tractor which allows for excellent operational visibility.

The post Shredders TST appeared first on CSWR Group.

Shredders THFM/R

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES:
THFM/R 105 Operating machine weight12000 ÷ 21000 Kg Cutting width1,05 m Required oil flow rate115 ÷ 120 l/m Rotor diameter420 mm Rotor diameter +cutting tools490 mm Machine weight860 Kg Pressure270 max bar Max. Cutting width25 cm
Forestry flail heads for excavators with rotor with forged hammer blades (max. cutting width: Ø 25 cm). THFM/R 130 Operating machine weight12000 ÷ 21000 Kg Cutting width1,30 m Required oil flow rate115 ÷ 120 l/m Rotor diameter420 mm Rotor diameter +cutting tools490 mm Machine weight950 Kg Pressure270 max bar Max. Cutting width25 cm
Forestry flail heads for excavators with rotor with forged hammer blades (max. cutting width: Ø 25 cm). THFM/R 160 Operating machine weight12000 ÷ 21000 Kg Cutting width1,60 m Required oil flow rate115 ÷ 120 l/m Rotor diameter420 mm Rotor diameter +cutting tools490 mm Machine weight1050 Kg Pressure270 max bar Max. Cutting width25 cm
Forestry flail heads for excavators with rotor with forged hammer blades (max. cutting width: Ø 25 cm).

The post Shredders THFM/R appeared first on CSWR Group.

ROBO MAX

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: RoboMAX is a equipment carrier machine that can work easily in different activities and branches. The series equipment includes two hydraulic double-effect functions. Designed to satisfy the most different needs, RoboMAX can be defined as a multifunctional remote controlled machine, with power and performances that can be easily compared to a traditional tractor with several accessories. The fundamental features that makes the difference about this machine among all other robots are: power, reliability, strenghtness, high performances and versatility and a diesel 75 HP engine. RoboMAX is a technologically advanced machine that responds to the current needs of safety and performances requested by the market. Energreen wanted to change the concept of the traditional cutting of grass, creating a remote-controlled machine, which can do operations of mowing where previously there was only the possibility to use hand brush cutters; this represents a new frontier of utilization, where the safety of the operators is put first. RoboMAX is certainly faster than the traditional ways of mowing; it allows to optimize the work in the most different working environments.

The post ROBO MAX appeared first on CSWR Group.

Shredders TSP

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: Horizontal reach: 5,11 – 5,34 – 5,52 m
Tractor size: from 80 ÷ 100 HP
Our TSP reach mower series offer advanced technology as part of their base equipment. The “Energy” version offers a powerful hydraulic gear system and the “Power” version offers a powerful hydraulic piston system in closed circuit.

The post Shredders TSP appeared first on CSWR Group.

Shredders THFM/F

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES:
THFM/F 105 Operating machine weight12000 ÷ 21000 Kg Cutting width1,05 m Required oil flow rate120 ÷ 130 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight890 Kg Pressure270 max bar Max. Cutting width30 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 30 cm
THFM/F 130 Operating machine weight12000 ÷ 21000 Kg Cutting width1,30 m Required oil flow rate120 ÷ 130 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight990 Kg Pressure270 max bar Max. Cutting width30 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 30 cm THFM/F 160 Operating machine weight12000 ÷ 21000 Kg Cutting width1,60 m Required oil flow rate120 ÷ 130 l/m Rotor diameter273 mm Rotor diameter +cutting tools500 mm Machine weight1120 Kg Pressure270 max barMax. Cutting width30 cm
Forestry flail heads for excavators with rotor with fixed flails (max. cutting width: Ø 30 cm

The post Shredders THFM/F appeared first on CSWR Group.

ROBO POWER

admin — Thu, 13 Jun 2019 00:00:00 +0000

STANDARD FEATURES: RoboPOWER was born to satisfy the most different needs, therefore it can be defined a MULTIFUNCTIONAL remote-controlled machine characterized by power and performances and can be easily compared to a traditional tolls carrier tractor for forestry, agricultural or industrial use. The fundamental features that distinguish this machine from any other robot are power, reliability, stability, high performances and versatility.
RoboPOWER is designed to be a multifunctional tools carrier resulting to be a machine suitable for various sectors and activities. The standard equipment includes a rear mechanic PTO 1000g/min complete of four double-acting hydraulic functions, which is totally managed by the remote control unit. The rear PTO has two senses of rotation (clockwise and counter-clockwise) in order to get the maximum flexibility for the accessories application. Moreover in the standard equipment, RoboPOWER is delivered with n° 2 hydraulic double-acting services and an service electric plug 12. The machine has also n° 4 working lights (both on the front and on the rear sides) in order to allow the maximum visibility on the working area in any different environments.

The post ROBO POWER appeared first on CSWR Group.